CCNA Online Training

⭐⭐⭐⭐⭐ rated by 1864 learners

Enroll For Course

About Instructor

Any Queries?

Check with our instructor in the demo session if you want to customized the course topics.

Student Reviews

Trusted by 12k+ Learners

Jobs On Jboss

Top IT MNC such as Infosys, HCL, TCS, Wipro, etc.

Salary Range

Average salary for Developer would be INR 3,72,584 PA.

Pre-requisites

Basic Computer knowledge.

CCNA Training & General FAQ's!

Networking concepts
  • Components of network – router, switch, hub, bridge etc
  • Types of Network – LAN, MAN, WAN, VPN, PAN & Content Network
  • Defining Network requirements – NIC- Ethernet (CSMA/CD)
  • 10/100/1000 mbps DUPLEX (Half/Full/Auto) – Connecting Media – Coax.
  • 10 base 2T – UTP/STP – CAT 1/2/3..
  • Straight through/cross crimping (only details no practical)
  • Fiber optics – Single/Multimedia
  • 100 Base TX/FX etc – wireless communication.
  • Ethernet cabling Standard.
  • Connecting Devices
  • Repeater – Hub – Switch – Bridge – Topology – Bus/Star/Ring
OSI – Model
  • 7 Layers – Communication between the Layers (Encapsulation & De-encapsulation) – PDU.
  • Layer 2 – MAC/LLC – 802.3/802.2 (SAP/SNAP) /Ethernet II – Frames
  • Broadcast/Collision domain – point of -Hub/Switch/Router
  • L4 – 3way handshake – windowing – and about – Connectionless
  • Packet size [64B (mini) to 1518B (Max)]
TCP/IP Model & Ipv4 Addressing
  • All Layers of TCP/IP Compound with – OS
  • Application Layer – TFTP/FTP/SMTP/TELNET/SNMP/DNS
  • Transport Layer – TCP/UDP – TCP Segment Format
  • 3 way handshake/windowing – UDP segment Format
  • Internet Layer
  • IP datagram format – Protocol No. – TCP 6 – UDP 17
  • ICMP – ARP – RARP
  • Introduction to IP addressing – Class A/B/C/D/E
  • Private IP address – First OCTET range etc.
Subnetting
  • Default Subnet Mask
  • Class C Subnetting & Practice no. given
  • Class B Subnetting & problems
  • Class A Subnetting & problems
Introduction to IPV6
  • Introduction
  • Host Address Assignment
  • Unicast, Multicast and other Special ipV6 Addresses
  • Configuring ipV6 Routing and Routing Protocols
  • Translations between ipV4 and ipV6
  • Summary
Basic of Router & Configuration
  • Selection of Router & Cabling a Route
    • When Router used – LAN with WAN connect – to connect networks of different IP
    • Different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
    • Cables used in different interfaces/purpose of interfaces
    • WAN interface cable – EIA/TIA – 232/449/530 – V.35 – X.21
    • Different CISCO series – modular/fixed – 10mbps/100 etc
    • Straight through between DTE & DCE
Different modes of operation & basic commands
  • Internal Components:
    • ROM – POST – BSL – ROM-MONITOR PRG – MINIIOS
    • Different interface of Router – AUI /S0/S1/AUX – console / BRI etc.
    • DRAM -Running Config
    • NVRAM – Startup Config
    • Flash MEM – IOS
  • Different Modes:
    • ROM Monitor – Reboot Mode – Setup – Exec Model
  • Exec Mode
    • User -Privilege – Global – Sub-configuration mode
    • Syntax/command to switch between modes
    • Assigning IP address for -E0-S0-S1
    • Enabling/disabling – console/privilege / vty password
    • Mold – command
    • Show Config / start / run / version / flash
  • Basic commands practice
    • Changing between modes – (user-privilege- Global-etc)
    • IP address configuration-E0-S0-S1
    • Password – enabling – encrypting it
    • Practice – motd – show commands – editing commands
    • Assigning host name (for Router)
  • Advanced Commands
    • Register value – X2102 – boot field value/purpose ROM monitor made – password breaking 8th/6th/13th bit of register value importance
    • Boot system flash/network/ROM – config-register (Changing register value) – etc command purpose Booting sequence – Backup & Recovery – CDP
    • Practice an above commands as well as following
    • Telnet – [ctrl+shift+6]x – disconnect – sh users /Sessions
    • Clear lines resume – [hostname resolving in telnet domain Enabling/disabling etc – no practical for this alone]
    • Overview of Cisco SDM (Security Device Manager)
IP Routing
  • IP Routing, Static Routing & Default Routing
    • IP routing – static routing – default- dynamic routing
    • Providing clock rate to up the link after identifying DCE by β€œSh controllers” command
    • Commands/syntax – Static/default routing
  • Static Routing & Default Routing
    • Practical-session for Static & default routing
  • Dynamic Routing and RIP
    • Dynamic Routing – IGP & EGP.
    • IGP – RIP-OSPF – EGRP – EIGRP
    • Classes of Routing Protocol – Distance vector – Link State – Balanced hybrid
    • Role of Routing Protocol – builds/updates/selects & Routes the packet
    • Soluting for Routing loops – Max. loop count – split horizon – Route poison Reverse – Hold down Timer
    • Features of RIP – distance vector algorithm – RIP V1/V2 – load sharing – metric (depends – loop count)
    • Metric value depends – loop count – Ticks – delay – Reliability – cost – MTU – Bandwidth
    • Command – Router RIP Network
    • Sh IP route
    • Timer value for RIP– Update/Invalid/ hold down/flush Timer
  • RIP
    • Dynamic Routing – RIP Practical
  • Dynamic Routing EIGRP & OSPF
    • Limitations of distance vector algorithm
    • Features of EIGRP and its operations
    • Configuring EIGRP – β€œAuto-redistribution”
    • Verify and troubleshooting EIGRP
    • Features of OSPF and its operation
    • Configuring single area OSPF
    • Verify and troubleshoot OSPF
  • Access List
    • Purpose/advantage of Access-list
    • IP [-for a host – for a network/sub network].
    • Std IP access-list – wild card calculation
    • Extd IP access list
    • Switch port ACL,.
    • Step involved in creating access list
    • Applying access list at the interface – (inbound/outbound)
    • Named access-list for IP
    • Access-list in Telnet sessiont
  • NAT IP standard Access List
    • Practical on
    • IP Std access-list
  • IP Extended Access List
    • IP Extd access-list, named access lists
  • NAT
    • Implement, Verify & Troubleshoot NAT
      • Explain the Basic Operation Of NAT
      • Using (including CLI/SDM)
      • Practicals on Static NAT, Dynamic NAT and PAT
      • Troubleshoot issues
    • WAN Technologies
      • WAN Technologies- Leased Line
        • Leased line
        • P to P communication
        • HDLC & PPP protocol-features
        • Enabling HDLC & PPP
      • PPP Link
        • PPP layer & its explanation/role
        • PAP/CHAP role
        • Configuring PAP/CHAP using commands
      • VPN
        • Describe VPN technology
        • Importance Of VPN
        • Benefits & Role
        • Impact & Components
      • Frame-Relay
        • Packet Switched Network
        • Virtual circuit – DLCI – Access-link – CRI – FECN – BECN – LMI
        • Enabling Frame-relay
        • Inverse ARP
        • Configuring frame-relay for
        • Mesh Network
        • Star Network
        • Combination of above two
      • Switching
        • Switching Operation and Configuration
          • Function –add-learning / Forward-filters the Frame / loop avoidance
          • Redundant path and its problems
          • Spanning Tree Protocol – purpose – its different state (blocking/listening/learning/forwarding)
          • Modes of operation of switch/Bridge
          • Port duplexing
          • Switch & hub – half duplex
          • Switch & Server – full duplex
          • CISCO catalyst switch 1912 & 1924 interface details
          • M/K/I modes
          • Basic and advanced commands
          • Enabling & configuring MAC address table
        • VLAN Configuration
          • VLAN – ISL – Trunking
          • Enabling Trunking
          • Assigning VLAN No. & name
          • Configuring ports to a specific VLAN
          • VTP purpose
          • VTP domain
          • VTP modes of operation
          • Switching Technologies (including VTP , RSTP , PVSTP, 802.1q)
          • Implement Basic Switch Security (including Port Security , Trunk access .etc )
        • Wireless LAN
          • Wireless Intro & Operation
            • Standards associated with Wireless Media (including WI-FI Alliance, ITU/FCC)
            • Ad-hoc mode, infrastructure mode
            • SSID, BSS, ESS
            • Basic Parameters to configure on a Wireless Network
            • Wireless Security Feature’s (WEP, WPA 1 / 2 )
            • Implementing Wireless Networks
Yes, Faculty will help you at the end of the course. The instructor will share a sample resume before course completion. During course, you can seek the faculty’s help to make your CV. We’ll give you interview question answers.

We can provide you interview question answers. The course covered some real-time examples. These examples might help you.

Our training covered as many real-time examples as we can. This course may equivalent to 2-3 years of real experience. You have to work hard if you are aimed at 4+ years of experience.

What is CCNA?

CCNA (Cisco Certified Network Association) is an information technology certification from Cisco Systems. CCNA certification is an associate-level Cisco Career certification.

Cisco CCNA Certification illustrates competence as a Network Professional. Cisco Certified Network Associate (CCNA) certification shows your capacity to install, configure, operate and troubleshoot routed & switched networks.

  • When it comes to mission-critical workloads, even a brief period of unplanned downtime can result in negative consequences for those clients, your employees, your brand reputation and the bottom line.
  • β€œAvailability comes down to what a specific enterprise needs,” said IBM Technology Support Services Solution Assurance Manager Leslie Campbell. β€œThey often require 100% uptime and prefer a planned outage of a few hours to achieve that.”
  • Optimized availability requires planned maintenance strategies. Good planning constitutes fixes applicable to the enterprise’s IT infrastructure and considers factors such as application and system interoperability, pervasive problem handling, and managing changes when problems happen. Proper planning not only helps improve availability by preventing problems during normal operations, it also helps minimize system downtime during a planned maintenance window.
  • Mainframe computers form the foundation of modern businesses, but they are largely invisible to the general public. Your average person likely doesn’t realize just how much they depend on a mainframe tutorial to use apps on their mobile phones, fill prescriptions or perform countless other everyday tasks.
  • When it comes to mission-critical workloads, even a brief period of unplanned downtime can result in negative consequences for those clients, your employees, your brand reputation and the bottom line.
  • β€œAvailability comes down to what a specific enterprise needs,” said IBM Technology Support Services Solution Assurance Manager Leslie Campbell. β€œThey often require 100% uptime and prefer a planned outage of a few hours to achieve that.”
  • Optimized availability requires planned maintenance strategies. Good planning constitutes fixes applicable to the enterprise’s IT infrastructure and considers factors such as application and system interoperability, pervasive problem handling, and managing changes when problems happen. Proper planning not only helps improve availability by preventing problems during normal operations, it also helps minimize system downtime during a planned maintenance window.

We have mainframe training institutes in all the locations. we also provide mainframe training in hyderabad and mainframe training in chennai

What is the pay scale of CCNA ?

The average annual salary of CCNA professionals is RS 3,72,584. And the salary depends on your experience, area and job role in CCNA.

What are the job opportunities of CCNA?

The most demanded job opportunities after completing the CCNA Training course:
Information Technology.
Software Engineer.
Technical Support Engineer.
Network Engineer.
Sr. Network Engineer.
System Engineer (Computer Network/IT) Network Administrator.
Network Administrator.

It will take 30 – 40 days to learn complete CCNA course. But it also depends on you that how fast you learn and strong your concepts because if you want to crack CCNA exam in first attempt then you have to study hard for it, clear your all concept and you also must have practical knowledge.

Cisco Certified Network Associate certification is an associate-level Cisco Career certification refers to wide range of technical specializations. A CCNA certification certifies a technician’s capacity to install, set up, design, troubleshoot and operate a medium-sized routed and switched computer network.
Learn CCNA online is the best way to get knowledge of CCNA. In online training, the faculty can provide CCNA tutorials, and CCNA training videos, etc. they provide guidance for the exam so definitely you can crack the certification exam in the first attempt then you will become certified. SVR technologies provide CCNA online Training with most experienced faculty it guides you till the end of the exam.
Of course, you can learn CCNA on your own but, when you are studying arise doubts then you definitely need some advice from others so take online training it will help you to learn more efficiently.
For CCNA certification course, it is always advisable to take it from a leading online institute, as it is important to have a strong foundational base first. If the online institute you choose has branches at limited locations, in that case you can enroll for Live CCNA training classes as well and if you are relying on some free or paid online resource for CCNA.

Based on which CCNA (Routing & Switching, CCNA Security, Cisco Data Center, CCNA wireless, etc.) you did you can go for the respective CCNP training and get advanced knowledge of the field (CCNA in other track) as well if the job profile requires you to do so. You can pursue anything based upon your interest.

No, nothing is hard in front of our interest SVR Technologies provide CCNA online training in simple words and in easy way. The way of online classes are very comfortable and understandable for beginner.

CCNA is the exam taken by CISCO to test the knowledge of the basic networking field. If you have studied about CCNA, then you can go to the Pearson center where the exam is organized. You register yourself there for CCNA. You take the date and give exam. Further, if you have any doubt, you can clarify at Pearson centre, and they will help you regarding the process. If you pass the exam, you can get certification for CCNA. After getting certification, you can easily get job in bank, hospital, MNCs, ISPs etc.

Scroll to Top